How to Prepare Metal Parts After Chemical Paint Stripping | Powder Coating & E-Coat Prep Guide


Watch the video above to learn how to prepare aluminum and steel parts for powder coating or E-Coat after chemical paint stripping. Discover the essential steps, including rinsing, surface preparation, outgassing, and corrosion prevention, to help achieve a clean surface and reliable coating adhesion.

How Do You Prepare Metal Parts After Chemical Paint Stripping?

Once the chemical paint stripping process is complete, proper surface preparation is essential before applying a new coating.

The process depends on whether you’re using a batch powder coating system or a continuous powder coating or E-Coat line.

What Are the Steps for Batch Powder Coating?

For batch powder coaters, the preparation process typically involves three main steps:

Step 1: Rinse the Metal Parts

After chemical stripping, thoroughly rinse aluminum and steel parts with water to remove any remaining stripping solution and residues.

Step 2: Prepare the Metal Surface

There are two common surface preparation options:

  • Option 1: Light Abrasive Blasting. Lightly blast the metal surface with fine-grit media to create an appropriate surface profile for coating adhesion. For steel parts, apply the new coating promptly to help prevent flash rust.
  • Option 2: Alkaline Degreasing. Clean the parts with an alkaline degreaser, rinse thoroughly with water, and continue with the required coating preparation process. This approach can reduce manual labor and improve productivity when compatible with the coating specifications.

Step 3: Outgassing Before Powder Coating

When required, preheat metal parts to approximately 400°F (200°C) for a specified period before powder coating.

This process helps release trapped moisture, gases, and volatile contaminants. It can be particularly useful for porous cast aluminum parts.

The appropriate outgassing temperature and duration depend on the metal, part geometry, and coating requirements.

How Do You Prepare Parts for E-Coat or Continuous Powder Coating Lines?

For continuous industrial coating lines, the process is generally simpler:

  1. Rinse after stripping: Wash the metal parts thoroughly with water to remove chemical residues.
  2. Return parts to the coating line: Once clean, the parts can enter the standard pretreatment process, which commonly includes five or six stages before the new coating is applied.

These pretreatment stages help prepare the surface for proper coating adhesion and corrosion resistance.

How Can You Prevent Rust Between Stripping and Recoating?

Steel parts may develop flash rust when exposed to moisture or humidity after stripping.

If parts will not be recoated immediately, a compatible corrosion inhibitor can provide temporary protection.

  • Batch powder coating: Remove the inhibitor with an appropriate degreaser and rinse before outgassing and applying the new coating.
  • Continuous coating lines: The inhibitor may be removed during the initial cleaning stages, provided the pretreatment process has been validated for its removal.

Proper cleaning before recoating is essential to prevent adhesion problems and coating defects.

Improve Your Paint Stripping and Recoating Process With Greensolv

Greensolv provides industrial chemical paint stripping solutions, including ALUMISTRIP™, STEELSTRIP™, and AEROSTRIP™, along with heated immersion strip tank systems for manufacturers, powder coaters, and metal finishing facilities.

Whether you’re recovering rejected parts, removing defective powder coating, or preparing components for E-Coat, Greensolv can help improve your stripping process and reduce production costs.

Explore our chemical paint stripping solutions or contact Greensolv to request a free stripping efficiency test on your metal parts.