REQUEST AN ESTIMATE

SMARTER PROCESSES. SAFER OPERATIONS. RELIABLE RESULTS.

HIGH-PERFORMANCE STRIPPING
AND CLEANING SOLUTIONS

Our stripping and cleaning solutions are engineered to deliver continuous efficiency, reduced labor, and safer operations across industrial environments.

Designed for performance and production-level reliability, they help optimize cleaning and stripping processes while maintaining consistent, repeatable results.

With eco-friendly solutions, our products support lower operating costs, higher throughput, and sustainable performance.

Greensolv's Efficiency Program (GEP)

The stripping solution will maintain 90% of its original efficiency for years without ever dumping the tank.

Product Category

PAINT STRIPPER

Aerospace Grade

AEROSTRIP

High Performance Hot Paint Remover – Aerospace

Metals: Mg, Ti, Al, Steel, Stainless, Cadmium
Time: 15-60 min @ 140-176°F
TDS

AEROSTRIP is a highly effective, biodegradable liquid paint remover designed for industrial and aerospace coating removal. Its non-corrosive formulation makes it safe for use on a wide range of metals, including aluminum, steel, stainless steel, cadmium, titanium, and magnesium, in accordance with applicable aerospace specifications.

Despite its user-safe and biodegradable chemistry, AEROSTRIP delivers fast, powerful stripping performance, removing even the most demanding coating systems in as little as 15 to 60 minutes under optimal operating conditions (140–176°F / 60–80°C).

  • Extremely effective & Non-corrosive to any metals
  • Biodegradable, No HAP (Hazardous Air Pollutant)
  • Low evaporation rate & Non-flammable
  • Can be cleaned and reused

Typical Applications

Aerospace stripping tank • Industrial stripping tank

Typical Coatings

Catalyzed paints (epoxies, polyurethanes, integral fuel tank) • Powder coatings (polyester & polyurethane) • E/Coat • Silicone polysulfide

✦ Aerospace Specifications

Tests performed by independent laboratory: SMI, Florida, USA

Industrial Grade

ALUMISTRIP

Industrial Liquid Paint Stripper

Metals: Al, Steel, Cu, Stainless, Cast Iron
Efficiency: 90% maintained with GEP
TDS

ALUMISTRIP is a highly effective, biodegradable liquid paint stripper engineered for industrial coating removal. Compatible with aluminum, steel, and copper, it delivers powerful stripping performance while maintaining low operating costs.

When operated between 140–176°F and supported by the GREENSOLV Efficiency Program, ALUMISTRIP maintains up to 90% of its original efficiency, ensuring long-term process stability and consistent results. Typical stripping times of 20 to 60 minutes.

15-45min
E-Coat @ 175°F
25-45min
Powder Coatings
$0.40-0.60/ft²
Operating Cost

Typical Applications

Industrial strip tank for aluminum parts • Ideal for Powder Coaters to reclaim rejected parts

Typical Coatings

Powder coatings • E/Coat • Catalyzed paints • Non-catalyzed paints

0% VOC, No HAP

STEELSTRIP 255

Industrial Alkaline Paint Stripper for Immersion (Liquid)

TDS

STEELSTRIP 255 allows you to create a low-cost, high-performance paint stripping solution. This biodegradable immersion stripper is safe for workers and delivers powerful, consistent stripping performance while keeping operating costs under control.

Used at a 15% additive concentration (v/v) in a heated alkaline detergent, it removes even the toughest coating systems in 60 to 120 minutes and eliminates manual scraping. Compatible with ferrous metals and copper, operating at 140–185°F.

  • Build Your Own: 15% concentration in heated alkaline detergent
  • No Manual Scraping: Removes toughest coatings in 60-120 minutes
  • Ultra Low Cost: Most economical stripping solution
  • 0% VOC, No HAP, Biodegradable
$0.05-0.15/ft²
Operating Cost
30-120min
Process Time @ 185°F

Typical Applications

Industrial stripping tank for ferrous metal parts • Tank wash (bulk transport of latex resins)

Typical Coatings

Powder coatings • E-Coat • Catalyzed paints • Non-catalyzed paints • Latex paints & resins • Adhesives

Wheel Specialist

WHEELSTRIP

Industrial Liquid Paint Stripper

Metals: Al, Steel, Cu, Stainless, Cast Iron
Efficiency: 90% maintained with GEP
TDS

WHEELSTRIP is a highly effective, biodegradable liquid paint stripper designed for industrial coating removal. Compatible with aluminum, steel, and copper, it delivers powerful stripping performance while remaining safe for workers.

When operated at 140–185°F and supported by the GREENSOLV Efficiency Program, the solution maintains up to 90% of its original efficiency and removes most catalyzed paints and powder coatings in 20 to 90 minutes.

Stripping Performance @ 185°F

Domestic wheels 30-90 min $2-4
Polished wheels 20-40 min $2
European wheels 45-120 min $2-4
Japanese wheels 45-90 min $2-4
Product Category

CLEANER & DEGREASER (WATER RINSING)

Citric Acid Based

G-CLEAN 247

Passivating Agent for Stainless Steels

Standard: ASTM A967-05
For: Stainless Steel, Iron
TDS

G-CLEAN 247 is a highly effective, water- and citric-acid-based passivating agent designed to remove free iron ions from stainless steel surfaces. It meets ASTM A967-05 passivation standards and effectively eliminates free iron, rust, and oxidation.

Compatible with a wide range of materials—including metals, plastics, concrete, masonry, and glass—formulated with organic acids, surfactants, and corrosion inhibitors, G-CLEAN 247 offers very low toxicity and provides a safer alternative to nitric acid-based passivating agents.

  • Dissolves free iron ions
  • Water & citric acid based, biodegradable, 0% VOC
  • Efficient on all stainless-steel types
  • Safer alternative to nitric acid (Low toxicity)

Typical Applications

Stainless steel passivation • Rust cleaning • Parts cleaning by soaking

Concentrate

G-CLEAN 257

Rust & Calcium Remover – Concentrate

Makes: Up to 40 gallons
For: Steel, Al, Concrete, Plastic, Painted
TDS

G-CLEAN 257 is a biodegradable, water-based acidic cleaner formulated with organic acids to effectively remove rust, oxidation, scale, and calcium deposits. Designed for demanding industrial applications, it delivers fast, reliable results on tough inorganic contamination.

Suitable for use on ferrous and non-ferrous metals, painted surfaces, concrete, masonry, plastics, glass, and wood. Formulated with a balanced blend of surfactants, organic acids, and chelating agents, featuring low toxicity and optimized low-pH formulation.

  • Thoroughly cleans rust & oxidation
  • Increases paint adherence on all metal substrates
  • Water based and biodegradable, 0% VOC
  • Great to dissolve calcium
CFIA Approved

G-MAX 328

Powerful Alkaline Cleaner & Degreaser – Food Plant Safe

TDS

G-MAX 328 is a powerful, biodegradable, water-based alkaline cleaner designed to remove tough industrial contaminants, including oil and grease, carbon deposits, dirt, stains, ink, bacteria, and organic residues. It is CFIA-approved for food plant use as a non-food chemical.

Supplied as a concentrate, it can be used undiluted for heavy-duty cleaning or diluted with water to match your application needs. High-pH blend of surfactants, alkaline salts, and chelating agents delivers exceptional cleaning efficiency.

  • Thoroughly cleans tough contaminants (Oil, Dirt, Carbon, Bacteria, Molds)
  • Biodegradable, 0% VOC
  • Can be diluted up to 1:40
  • Approved by CFIA – Canadian Food Inspection Agency
"

Alkaline cleaners can clean particles and contaminants better than a solvent borne product.

University of Montreal & IRSST

Product Category

CLEANER (NO RINSING)

Low VOC & Low Toxicity

GREENSOLV 935

Gun Wash

TDS

GREENSOLV 935 is a highly effective paint thinner for catalyzed coatings, specifically formulated for cleaning paint guns and pumps. It offers low toxicity and very low VOC content compared to traditional paint thinners and gun wash solutions.

This biodegradable solution is suitable for a wide range of coatings, including wash primers, enamels, epoxies, and polyurethanes. Used undiluted, it can be recycled multiple times by distillation, helping reduce operating costs and environmental impact.

⚠

Safety Notice

Highly flammable. Vapors may ignite—avoid sparks, flames, and ignition sources, and use only in well-ventilated areas.

  • Highly efficient at dissolving most types of coatings
  • Contains no methanol, xylene, toluene, MEK, MIK, naphtha or mineral spirits
  • Low VOC & Low toxicity
  • Evaporates quickly without leaving any film

Typical Applications

Cleaning paint equipment • Degreasing metals before coating • Reducing epoxy & polyurethane coatings • Solvent-cleaning for ink, oil and grease

Low Odor – Dielectric

GREENSOLV 940

Low Toxicity Solvent Degreaser

Flash Point: 38°C (100°F)
Removes: Oil, Grease, Dirt
TDS

Greensolv 940 is a high-performance degreaser that evaporates completely, leaving surfaces clean, dry, and ready for coating—no water rinse required. It quickly removes oil, wax, and grease from a wide range of parts and equipment.

Compatible with most metals, painted surfaces, concrete, glass, rubber, and plastics. Formulated with low-toxicity, photodegradable solvents and a low ozone-depleting potential, it provides a safer, environmentally responsible solution.

  • Excellent cleaner/degreaser for oil and grease
  • Low odor & Dielectric
  • Flashes off without leaving a residue (excellent pre-paint cleaner)
  • Low Ozone Depletion Potential & Photodegradable

Cookie Policy
►
Necessary cookies enable essential site features like secure log-ins and consent preference adjustments. They do not store personal data.
None
►
Functional cookies support features like content sharing on social media, collecting feedback, and enabling third-party tools.
None
►
Analytical cookies track visitor interactions, providing insights on metrics like visitor count, bounce rate, and traffic sources.
None
►
Advertisement cookies deliver personalized ads based on your previous visits and analyze the effectiveness of ad campaigns.
None
Cookie Policy